Today the 3rd and final coat of Jade Green was applied.
Today I sanded the hull with 220 grit and applied the second coat of Jade Green EZPoxy. Tomorrow I’ll sand and apply a third, then apply a coat of varnish to her transom.
This morning I faired the hull and applied the first coat of EZPoxy Jade Green top coat. At least 2 more coats to go.
Today I faired the hull and added a coat of West 410 fairing compound to her fiberglassed areas. Tomorrow I’ll fair her smooth and begin to paint.
This morning I prepped the hull for fiberglassing and then layered the glasses down with epoxy and secured the keel shoe.
Today I had a friend help me turn her over this morning. I prepped the hull by filling all her screw holes and laying down the first layer of fiberglass around the daggerboard trunk were it meets the bottom of the hull. I then built the daggerboard.
Today I did all the off-white touch up and added the jade green pinstripe to the top edge of her plywood sheer. We just have to wait a couple day for all the paint to dry completely, then turn her over to fiberglass and paint her hull.
Today I sanded the 3rd coat of brightwork and applied the 4th and final coat. Tomorrow I will mask and do some major off-white touch up painting.
Today I cleaned up the CB Trunk and Mast Step then added some epoxy filler. I also applied the first sealer coat of brightwork.
Today I built and fit both the Daggerboard Trunk and Mast Step.